LDP102 Liquid Detection Probe
LIQUIP LDP SERIES OPTIC OVERFILL SENSORS RAISE THE BAR IN SAFETY WITH TRUE FAIL SAFE TECHNOLOGY & INDIVIDUAL ‘OPTIC-ON’ LIGHT.
Unlike other optic sensors, the Liquip Optic-On sensor has its own special LED in the rear of the sensor, and a visible optic light in the sensor tip to indicate whether it is dry and operational.
Troubleshooting sensors couldn’t be easier…simply look for the sensor with the lights in the tip or rear of the sensor not working.
Glass prism. Three stage viton sealing. Solid state electronics in potting compound. Anodised aluminium retainer & body.
Extension bars of aluminium to suit various length applications.
Trigger point + 0.5 mm repeatability. The prism is Light-shielded by the retainer.
Probe can be removed from tank top without having access to interior to remove a hood.
LDP102 – 2 wire
LDP105 – 5 wire
Aluminium probe body, retainer & extension, glass prism and epoxy, Viton O-rings.
IECEx TSA 05.0058X
Ex ia IIA T4 IP66 T ambient = -40 to +65 degrees C
Ui = 30V, li = 500mA, Ci = 105pF, Li = 0mH